Glass isn’t perfect and can be really difficult to explain, especially when those standards don’t align to the client’s expectations.

Glass industry standards – primarily visible defects, are set by the ASTM (American Society for Testing & Materials). ASTM glass standards cover a wide variety of glass issues and it’s not easy to get to the heart of the matter. Visible glass defects are the kicker in the luxury custom home niche. Expectations are high for everything, and glass isn’t perfect. The larger the piece of glass, the less perfect it is allowed to be.

The BIG Question: When is a defect not a defect?

Quick Answer:

1. Move away from the glass.
2. Stand back 10 feet.
3. Face the glass straight-on at 90 degrees.
4. View in daylight but not direct sunlight.
5. Inspect the central 80% portion of the glass.
Under these conditions, if you can’t see it from 10 feet – it isn’t a defect.

ASTM’s Official Standards for Imperfections in Glass

 

The official ASTM version is longer. Although wildly entertaining, it can be a tricky plot to follow. We’ve included a brief summary in this article of some key parts of the ASTM. Keep in mind there are different types of defects with different inspection rules. The 10’ rule is a good way of educating the Owner that glass standards exist. As with most things, the 10’ rule isn’t definitive. For example, on sealed units over 35 square feet, the glass is allowed to have three 1” scratches and still be within standards – even if those scratches are visible from 10’. Ninety percent of ASTM conversations never have to happen. If the client or Owner knows the short version of the inspection, discussed in the early stages, you’ll just have to get your entertainment elsewhere.

​

ASTM International is the basis for understanding glass and coating quality, allowable defects, and visual inspection criteria. ASTM has many different specifications and classifications depending on the type of glass being analyzed or quality controlled. Some examples of coating quality criteria are:
1. ASTM C 1036-16 (Standard specification for flat glass) Q3 / Glazing select specifications or better
2. ASTM C 1048-92 (Standard specification for heat-treated glass – kind HS, kind FT coated and uncoated glass) specifications using Q3 quality or better
3. ASTM C 1376-97 (standard specification for Pyrolytic and vacuum deposition coatings on glass) kind CV specifications or better.

Before pointing out defects and imperfections, understanding ASTM inspection criteria is very important. It outlines things such as inspection distance, lighting requirements, inspections times etc.

Examples of Visual Inspection criteria

• Glass shall be inspected in the central (see illustration and categories below) area in transmission at a distance of 5 feet from the observer, and in reflection at a distance of 10 feet from the observer.
• Glass shall be inspected in the border area in transmission and reflection at a distance of 10 ft from the observer.
• Glass must be inspected using a viewing angle of 90 degrees from the glass with suitable background light (daylight without direct sunlight or a range of 500 – 1000 foot lamberts.) If a lighting box is used as a light source, the diffusing plate shall be parallel to and at a distance of 10 ft from the glass.
• Inspection should not exceed viewing of more than 5 seconds for lites up to 6 square feet, 10 seconds for lites up
to 35 sq ft, and 20 seconds for lites larger than 35 square feet, either in transmission or reflection.
• If defects are visible beyond what is allowable as listed by sizes (square feet) below using the inspection criteria, the glass may be rejected.

​

Allowable Defects

a) Single (individual) lites up to 6 square feet.
1. Scratches – Viewable as stated above must be 1” or less. No more than 1 is allowed per lite.
2. Debris, Dirt, Spots – Viewable as stated above, must be 1/16” or less. No more than 1 is allowed per lite.
3. Seeds, Bubbles, Knots, Stones – Viewable as stated above, must be 1/16” or less. No more than 1 is allowed per lite.
4. No more than 1 total viewable defect as described above is allowed per lite.
5. Shells – No more than ¼” from edge less than ½ the thickness of the lite. No more than 1 per side.
6. Chips – No more than 1/8” from the edge. No more than 1 per side. (see illustration for chips on page x.)
7. Coating – Must be uniform on the lite inspected when viewed in transmission using the inspection criteria previously stated above.
8. The border area is comprised of 2 inches plus ½” from each edge of the lite. All other area is the central area (see illustration on page x.)

​

b) Single (individual) lites 6 to 35 square feet.
1. Scratches – Viewable as stated above must be 1” or less. No more than 2 are allowed per lite and must be separated by a minimum of 24 inches.
2. Debris, Dirt, Spots – Viewable as stated above, must be 1/16” or less. No more than 2 are allowed per lite and must be separated by a minimum of 24 inches.
3. Seeds, Bubbles, Knots, Stones – Viewable as stated above, must be 1/16” or less. No more than 2 are allowed per lite and must be separated by a minimum of 24 inches.
4. No more than 2 total viewable defects as described above are allowed per lite.
5. Shells – No more than ¼” from edge less than ½ the thickness of the lite. No more than 1 per side.
6. Chips – No more than 1/8” from the edge. No more than 1 per side. (see illustration for chips.)
7. Coating – Must be uniform on the lite inspected when viewed in transmission using the inspection criteria previously stated above.
8. The border area is comprised of 4 inches plus ½” from each edge of the lite. All other area is the central area (see illustration.)

​

c) Single (individual) lites over 35 square feet.
1. Scratches – Viewable as stated above, must be 1” or less. No more than 3 are allowed per lite and must be separated by a minimum of 24 inches.
2. Debris, Dirt, Spots – Viewable as stated above, must be 1/16” or less. No more than 3 are allowed per lite and must be separated by a minimum of 24 inches.
3. Seeds, Bubbles, Knots, Stones – Viewable as stated above, must be 1/16” or less. No more than
3 are allowed per lite and must be separated by a minimum of 24 inches.
4. No more than 3 total viewable defects as described above are allowed per lite.
5. Shells – No more than ¼” from edge less than ½ the thickness of the lite. No more than 1 per side.
6. Chips – No more than 1/8” from the edge. No more than 1 per side. (see illustration for chips.)
7. Coating – Must be uniform on the lite inspected when viewed in transmission using the inspection criteria previously stated above.
8. The border area is comprised of 6 inches plus ½” from each edge of the lite. All other area is the central area (see illustration).